Electrical Connection; Safety Recommendations - Sima STAR 16 Manual De Instrucciones

10. ELECTRICAL CONNECTION

The extension cable used to feed the machine needs to have a minimum section of 4x2.5 mm
meters long. For a superior distance 4x4 mm2 can be used. In one of its ends, it is needed to connect a base
normalised ae rial of 16A 3
aerial pin of 16A 3P+T ó 16A 2P+T compatible with switchboard exit.
IMPORTANT: It is appropriate to cha
to change the adhesive labels indicating
machine before changing the voltage.

11. SAFETY RECOMMENDATIONS

• Machines with an electrical motor are alway
e quipped with a magneto-thermic and a differential that comply with the characteristics of the
motor:
2 CV, single-p hase at
2 CV, three-p hase at 400V,
Stirrups bending machines model Star-16 are to be used by trained people or people familiarized with their
operation.
Before starting up the ma
Learn how to stop the machine in a fast and safe way.
• Place the machine on
• Start the machine only when you have mounted the safety guards that come with the machine.
• It is recommended to use safety glasses, safety boots, gloves etc. Please always use approved
mat erials.
• Always us
effectuating.
• Prohibit strangers to access the place of work of the machine.
• Work clothes are not supposed to have loose articles that can cling into movable parts of the
machine.
• When you have to move the machine, unplug the electricity cables and block the moving parts of the
machine.
• Always keep protection elements and the safety guards in their correct positions.
• Damaged electrical cables should be urgently replaced.
• Unplug the machine from the electricity and never manipulate nor operate on the mechanical nor
electrical elements of the machine while the engine is on.
• Never use the machine for purposes other than those it has been designed for.
P+T ó 16A 2P+T comp atible with the mach
nge the position of the bridge plates in th
the voltage, to
230v, m agneto-ther mic of 15 A and a differenti
magneto-therm ic of
chine please read the instructions and make sure safety norms are respected.
a plane surface. Co nect the machine t the electricity only when you are sure
e In dividual Protec tion Equipment (IP
ine switch and in the ot
e engine terminals. It is also impo
reflect the change made . It is very important to unplu
s to be connected to normalised switch board that is
al of 15A/300m
10A and a differen tial of 10A/300mA
n o
E) in accordance w
10
ENGLISH
2 up to 25
her end, one normalised
rtant
g the
A.
.
ith the type of wo rk y ou are