Tool Use And Care; Specific Safety Rules For Bench Grinders - Urrea EB1006 Manual De Usuario Y Garantía

specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.

TOOL USE AND CARE

Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
12
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
BENCH GRINDERS
• Know your power tool. Learn the applica-
tions and limitations as well as specific poten-
tial hazards related to this tool.
• Guard against electrical shock by preventing
body contact with grounded surfaces.
• Keep guards in place and in working order.
Never operate the tool with any guard or cover
removed. Make sure all guards are operating
properly before each use.
• Remove adjusting keys and wrenches. Form
habit of checking to see keys and adjusting
wrenches are removed from tool before turn-
ing it on.
• Avoid dangerous environments. Do not use
power tools near gasoline or other flammable
liquids, in damp or wet locations or expose
them to rain. Keep work area well lighted.
• Don't force the tool. It will do the job better
and safer at the rate for which it was designed.
• Use the right tool. Do not force the tool or
attachment to do a job for which it was not
designed.
• Do not overreach. Keep proper footing and
balance at all times.
• Use recommended accessories. The use of
improper accessories may cause risk of injury.
• Use only grinding wheels that are rated
greater than 3600 rpm.
• Never use wheel washers or wheel screws
that are defective or incorrect and never touch
grinding wheel or other moving parts.
• Don't stand on tool. Serious injury could oc-
cur if the tool is tipped or if the wheel is unin-
tentionally contacted.
• Direction of feed. Be aware of wheel rota-
tion direction; never grind without the work
rest being properly set. Never grind more than
one workpiece at a time.