Unpacking And Inspection - Beha-Amprobe Telaris ProInstall-100-EUR Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 132
• Use the product only as specified, or the protection supplied by the product can be
compromised.
• Do not use the product around explosive gas, vapor or in damp or wet environments.
• Do not use test leads if they are damaged. Examine the test leads for damaged
insulation, exposed metal, or if the wear indicator shows. Check test lead continuity.
• Use only current probes, test leads, and adapters supplied with the product.
• Measure a known voltage first to make sure that the product operates correctly.
• Do not use the product if it is damaged.
• Have an approved technician repair the product.
• Do not apply more than the rated voltage between the terminals or between each
terminal and earth ground.
• Remove test leads from the tester before the tester case is opened.
• Do not operate the product with covers removed or the case open. Hazardous voltage
exposure is possible.
• Use caution when working with voltages above 30 V ac rms, 42 V ac peak, or 60 V dc.
• Use only specified replacement fuses.
• Use the correct terminals, function, and range for measurements.
• Keep fingers behind the finger guards on the probes.
• Connect the common test lead before the live test lead and remove the live test lead
before the common test lead.
• Replace the batteries when the low battery indicator shows to prevent incorrect
measurements.
• Use only specified replacement parts.
• Do not use the tester in distribution systems with voltages higher than 550 V.
• Comply with local and national safety codes. Use personal protective equipment
(approved rubber gloves, face protection, and flame-resistant clothes) to prevent shock
and arc blast injury where hazardous live conductors are exposed.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 Telaris ProInstall-100 or Telaris ProInstall-200
6 batteries 1.5V AA Mignon
3 Test leads
1 Mains test lead
3 Alligator clips
3 Test probe
1 Remote probe
1 CD-ROM with user manual
1 Carrying case
1 Padded Strap
If any of the items are damaged or missing, return the complete package to the place of
purchase for an exchange.
4

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido