Start-Up And Use - Hotpoint Ariston FK 1041L P.20 X/HA S Manual De Instrucciones

Start-up and use

GB
pull (2).
! The first time you use your appliance, heat the empty oven
with its door closed at its maximum temperature for at least
half an hour. Make sure that the room is well ventilated
before switching the oven off and opening the oven door.
The appliance may emit a slightly unpleasant odour caused
by protective substances used during the manufacturing
process burning away.
! Turn the control dial to adjust the parameter shown on the
display between the "<" and ">" symbols.
! To make the setting process easier, keep the knob in
position: this will increase the scrolling speed of the numbers
on the display.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
! The touch controls cannot be activated if the user is
wearing gloves.
Some models are equipped with a system of hinges which
allows the door to close slowly, without the user having to
follow the movement through with his/her hand. To use the
system correctly, before closing the door:
• Open the door fully.
• Do not force the closing movement manually.
In order to optimise the cooking performance, when starting
the selected function, product settings will be applied that
could cause a delayed start of the fan and heating elements.
Switching the oven on for the first time
After connecting the oven to the electricity supply, the
first time it is switched on the user should also switch on
the control panel by pressing the
languages will appear in the menu. To choose the desired
language, select it using the control dial. Confirm by
pressing the icon.
Once the selection has been made, the display will show
the settings menu. Press the
using the control dial until you reach the EXIT command
and press the icon to begin using the oven.
! After choosing the language in the menu, if the display is
not used for another 30 seconds it will automatically revert
to programming mode.
28
WARNING! The oven is
provided with a stop system
to extract the racks and
prevent them from coming
out of the oven (1).
As shown in the drawing,
to extract them completely,
simply lift the racks, holding
them on the front part, and
button. The list of
icon or scroll through
Setings menu commands
To enter the settings menu, switch on the control panel and
press the icon.
Use the control dial to highlight the individual menu
commands.
To modify the setting, press the
The following parameters are listed in the menu:
LANGUAGE: select the language shown on the display.
PYROLYTIC: select the cleaning type.
CLOCK: set the exact time.
TONE: activate/deactivate keypad tone.
LIGHT: activate/deactivate the internal oven light during
cooking.
LOGO: activate/deactivate logo on start-up.
GUIDE: activate/deactivate operating tips.
EXIT: exit the menu.
! It is possible to exit the settings menu by pressing the
icon.
Control panel/door lock
! The door and control panel can be locked while the oven
is off, once cooking has started or finished and during
programming.
The door/control panel lock can be used to lock the oven
door and/or controls.
To activate it, press the
command by pressing the control dial:
• NO LOCK: deactivate an active lock;
• ONLY BUTTONS: only lock the controls;
• ONLY DOOR: only lock the door;
• BUTTONS AND DOOR: lock the controls and the door.
Confirm by pressing the
A confirmation buzzer will sound and the
on the display.
The lock may be activated while the oven is in use, or while
it is switched off. It can also be deactivated in all the above
situations and after the oven has finished cooking.
! When cleaning the appliance, the door lock may be closed
accidentally (there is an exposed spring). If this happens,
reopen it by turning the door lock upwards (see figure).
KO OK
Setting the clock
To set the clock, switch on the oven by pressing the
then press and follow the steps described.
1. Scroll through the menu commands using the control
dial, select CLOCK and press
2. Adjust the time using the control dial.
3. Once you have reached the correct hour value, press
the icon.
4. Repeat steps 2 and 3 to set the minutes.
icon.
icon and select the desired
icon.
icon will appear
icon,
.