CASO DESIGN TC 3500 Thermo Control Manual Del Usuario página 44

shows the actual temperature. If you briefly press on button 4 (TC) again then the set-
point temperature will be shown.
With the + / - buttons you can change the setting in range from 40 – 160 °C (temperature
stages 40 – 160 °C in 1 ° C – steps).
► Sous vide function: Press button 4 (TC) only ones, and then the button 7 (Timer) then
the timer will start counting not until the set temperatur was reached.
External Thermometer – control of the desired core temperature in the food:
► Attach the holder at pot and insert the external thermometer. Take care that the cable of
the thermometer does not touch the cooking vessel.
 Press button 4 (TC) for 3 seconds. The preset temperature stage of 65 ° C will be
shown in the display.
 With the + / - buttons you can change the setting in range from 40 – 160 °C and so you
can control the core temperature. (temperature stages 40 – 160 °C in 1 ° C – steps)
 After this stick the thermometer in the food.
► You can switch to power mode with button 5 (Level)
► Please note that the two functions of level and temperature can be chosen as
alternative.
► You can choose the functions level, temp for internal thermometer or function Thermo
Control alternatively. The most recently selected function is active.
► By pressing button 4 (TC) the desired set-point temperature is displays and can be
changed.
► By pressing button 5 (Level) the desired level is displays and can be changed.
 When the desired set-point temperature is reached, the heat supply is stopped and the
display shows "END".
 In addition you can control the cooking time with the timer:
a) If the desired core temperature is reached but the programmed time has not yet
expired, then the heat supply will be stopped and the display shows "END".
b) If the programmed time is reached, but the desired core temperature was not yet
reached, then the device switches off automatically.
Please note
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C.
Please note
Please note
Please note
44