Specifications; General Specifications - Minipa MFA-840 Manual De Instrucciones

CAUTION
1. Never exceed the operational voltage specified as
200V ~ 480V AC three phase.
2. Make sure not to exceed the time limit for continuous
operation specified as 60 minutes at 200V and 4
minutes at 480V. The maximum time indicated above
is measured from the time when more than 2 test leads
of the unit are connected to the power supply cords.
3. Do not expose the instrument to the direct sun, extreme
temperature, humidity or drops.
4. The instrument must be used by trained and qualified
personal according to the instructions of this manual.
Minipa does not make responsible for damages caused
by operation error or no conformity with the safety
instructions and procedures. It is essential to read
and understand the safety rules of this instruction
manual, and they must be observed when using the
instrument.

3) SPECIFICATIONS

A. General Specifications
• Operation Voltage: 200V ~ 480V AC, three phase.
• Operation Frequency Range: 20Hz ~ 400Hz.
• Limit Time for Continuous Use:
- 60 minutes maximum at 200V AC.
- 4 minutes maximum at 480V AC.
14