Starting Up; Inserting Batteries - boso medistar S Manual Del Usuario

Starting up

44
The device must be installed and put
into operation in accordance with the
instructions in this manual.
+
+
➡ Use only high quality leak-proof bat-
teries of the correct specifications
(see 'Technical data' page 62).
medistar 2
SYS
mmHg
MEMORY
DIA
mmHg
PUL /min
START
Illustration 1
Never mix old and new batteries or
different makes.
If the batteries are not inserted
correctly, the monitor will not work and
this may cause the batteries to heat up
and leak, damaging the monitor.
➡ Inserting the batteries
The battery compartment is located
on the left side of the monitor. Insert
batteries in the battery compartment
as shown in illustration 1.
➡ Remove the batteries if the monitor
is not to be used for any length of
time.