Gram S3 Serie Manual De Utilización página 16

Once memory position desired is selected, press and display will show
one number. To modify it and introduce a tare value, use and to
select the desired digit.
To go to right digit, press to modify it use and . To modify any
digit on the left, press still the desired digit sparks, then follow the same
procedure explained before.
To finish, press key and tare will be saved. If we wish to keep saving tares,
press again and follow the same procedure.
To finish, after confirming the last tare saved, display will show "ILUPro".
Press to escape to weighting mode.
TARE memory use
In weighting mode, with empty plate, press longer than a second till
"TLU XX" is shown, where XX is the last digit of the TARE memory saved.
To access to another memory position, press and to surf along
the tare memories still you find the desired memory number.
To confirm, press . Display will show tare memory value with negative
sign. Now you can place the object in the plate, and the tare value will be
deducted from weighting value (shows net weight).
You can operate with the object in the plate, then the display indicates the net
weighting value.
16