Current Weighing - Gram S3 Serie Manual De Utilización

2. Place the object or objects inside the recipient or box. Display will show
net weight, deducting the tare (recipient/box weight).
3. Remove all objects from the plate. Display will cancel tare and set to 0.
4. To weight again, repeat the same operation. You can use it indefinitely
without pressing any button.

Current weighing

Switch on the scale pressing
Display will be on in a few seconds, afterwards it will show zero value.
If there is any object in the plate, display will show the object weight, except
from the case its weight is very low, then scale will start next zero following.
Press
depending on its configuration).
Place the object you desire to weight over the plate. Screen will indicate
object weight value, it should be ready when "stability" symbol is shown at
the top left side on the display.
18
to select desired weighting unit (default unit is "g or kg",
button.