Auto-Tare - Gram S3 Serie Manual De Utilización

Auto-Tare

This function allows tare function with recipient or box to be done
automatically, without pressing button. Display detects the first weight
(recipient or box), then operates tare function (sets to 0), and gets ready to
weight the product in the box or recipient. Afterwards, it sets to 0 and you
can start again the same procedure repeatedly without pressing any button.
function activation
To enable Auto Tare, follow these instructions:
1. Press . Display will show "PLUPro". Press
display shows "AUT-t".
2. Press . Display will show in the last position one digit, in accordance
with the following meaning:
0. Unable function.
1. Enabled Function.
3. Press to confirm. Press
function use
1. Place the recipient or box over the plate. Scale will operate the tare
function and display will show 0 and tare symbol will be on.
to return to weighting mode.
several times, still
17