Use - Berkel BS+1650 T Manual De Uso

1.5

Use

The saw has been designed and produced to cut bones, meat and fish.
It must only be used on a work table or on the stand supplied by manufacturer.
As it is designed for food, the material used for the blade and all other components
that can come into contact with the product being cut have been carefully selected.
The machine is designed for professional use and should therefore be used by a
skilled operator who must carefully read this manual before using the machine.
This machine has been manufactured in compliance with the EEC directive
89/392.
The saw is also suitable for cutting frozen fish and does not require any particular
environmental conditions. You are nevertheless advised to keep it in a closed envi-
ronment, protected from bad weather and sudden changes in temperature.
1.6 Uses not permitted
The saw must be used for the purposes expressly intended by the manu-
facturer only. In particular:
- Do not use the machine unless it has been correctly installed with all the guards
in perfect condition and correctly fitted to avoid the risk of severe injury.
- Do not use the machine if the blade is not in perfect condition and correctly
sharpened as the blade can break.
- Do not stand on machine, even if not working. Apart from the danger of falling,
the machine may also be damaged
- Do not access the electrical components without previously disconnecting the
machine: risk of electrocution.
- Do not use the machine for cutting items other than meat, bones, fish and simi-
lar.
- Do not stop the blade with your hands; wait until it stops to avoid the risk of seri-
ous injury.
- Do not wear rings, watches, jewellery, loose or hanging garments such as
scarves, ties, torn clothes, unbuttoned jackets or smocks with open zip which can
get tangled in the moving parts. Use approved safety clothing: non-slip shoes,
safety goggles, work gloves, ear defenders and safety mask. Consult your em-
ployer re. current safety regulations and safety devices required.
- Do not start the machine if it is not working correctly. Before using the machine,
ensure that any dangerous condition has been appropriately eliminated. If a fault
occurs, stop the machine and notify the maintenance personnel.
- Do not allow non - authorised personnel to carry out work on the machine. In the
event of an electrical accident, firstly remove the victim from the conductor (as he
will usually be unconscious). This operation is dangerous as the victim is a con-
ductor in this case and touching him can cause electrocution. You should there-
fore disconnect the contact directly from the line power supply valve or, if this is
not possible, distance the victim using insulating material (wooden or PVC sticks,
fabric, leather etc.). A doctor should be promptly called and the patient taken to
hospital.
-Do not make any intervention without authorisation.
- Follow the procedures given for maintenance and technical assistance
9