Maintenance; Important Warnings; Foreword; Checks Carried Out At Our Factory - Berkel BS+1650 T Manual De Uso

7 Maintenance

7.1

Important warnings

All maintenance and cleaning operations on the saw must be carried ut with the
machine at a standstill and disconnected from the mains. The area where the
maintenance operations are carried out must always be kept clean and dry..
Do not allow non-authorised personnel to work on the machine. Do not touch the
openings without adequate protections (gloves, goggles, etc...). Do not use petrol,
solvents or other inflammable liquid as detergents; use the authorised non-toxic
and non-flammable solvents on sale. Do not use compressed air to clean the ma-
chine. If really necessary, use goggles with side protections and limit the pressure
to a maximum of 2 atm. (1,9 bar). Do not use naked flames as a means of lighting
when carrying out checking and maintenance operations. Do not lubricated the
machine when operating.
7.2

Foreword

Good maintenance and correct use are fundamental to ensure good saw perform-
ance and safety. To guarantee regular and constant operation of the machine and
to avoid lapse of the guarantee, only original spare parts must be used when re-
placing components.
7.3

Checks carried out at our factory

Your machine has undergone extensive testing by the manufacturer in order to
ensure correct start-up and settings. In particular, the manufacturer has carried out
the following checks:
Before starting up:
-
Check on the machine operating voltage: it must correspond to the purchaser
requirements.
-
Check to ensure that all the warning and danger signs and rating plate with tech-
nical specifications and serial number are fitted.
-
Check on tightening of all the bolts.
-
Check on tensioning of the cutting blade.
-
Check to ensure that the machine complies with the current regulations and the
previous of this manual.
24