Preparation For Use - Breitling Avenger Serie Manual De Instrucciones

PREPARATION FOR USE

WINDING – TIME-SETTING
1. Unscrew the water-resistant crown counter-clockwise.
Wind the watch by approximately 40 clockwise turns
of the crown.
2. Pull the crown out to position 2, turn it clockwise to
adjust the calendar to the day prior to the activation
date.
3. Pull the crown out to position 3. Turn the hands
forward until the correct date jumps into place, at
midnight. Then adjust the hour and minute.
4. Push the crown back into position 1. Press it gently,
turning it gently clockwise, then tighten it again until
you feel some resistance.
Do not force!
14
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph.
Hand 3 shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. The measurement is made in hours (totalizer 1),
minutes (totalizer 2), seconds and
(hand 3).
3. Reset the chronograph to zero by pressing pushpiece B.
/ of a second
1
5
15