Led Indicator Status - Ezviz CS-CV246 Guia De Inicio Rapido

Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in
the figure below.
Power Interface

LED Indicator Status

Turn on the camera and let it power up. The camera will completely rotate side-to-side and tilt up-
and-down once.
Steady Red: Camera is starting up.
Slowly Flashing Red: Wi-Fi connection has failed.
LED Indicator
Fastly Flashing Red: Device exception (e.g. MicroSD
card error).
Flastly Flashing Blue: Camera is ready for the Wi-Fi
connection
Steady Blue: Video is being viewed or played back in
EZVIZ App.
Slowly Flashing Blue: Camera is running properly.
1
Power Outlet
Power Cable