Accessories And Attachments; Tools Needed For Assembly; Carton Contents - Hitachi C 10RB Manual De Instrucciones

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES
WARNING
Visit your Hardware Department or see the Power
and Hand Tools Catalog to purchase recommended
accessories for this power tool.

TOOLS NEEDED FOR ASSEMBLY

Supplied
13 mm Hex Wrench
4 mm Hex Wrench
5 mm Hex Wrench
UNPACKING AND CHECKING CONTENTS
Separate all parts from packing materials. Check each
part with the illustration on the next page and the "Table
of Loose Parts" to make certain all items are accounted
for, before discarding any packing material.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
A Table saw assembly
B Blade guard and splitter ass'y
C Rip fence
D Dado table insert
E Miter gauge
F Push stick
G Blade wrench
H Push stick storage
I Blade
J Handwheel handle
K Hex wrenchs
L Blade guard hardware bag ass'y
Not Supplied
Medium Screwdriver
#2 Phillips screwdriver
Straight Edge

CARTON CONTENTS

QUANTITY
1
1
1
1
1
1
1
1
1
1
2
1
– 7 –
WARNING
To avoid the risk of personal injury:
• Do not use a dado with a diameter larger than 8".
• Maximum dado width is 13/16". DO NOT USE
WIDER COMBINATIONS.
• Do not use molding head set with this saw.
• Do not modify this power tool or use accessories
not recommended by Store.
Adjustable Wrench
Combination Square
WARNING
If any part is missing or damaged, do not attempt
to assemble the table saw, plug in the power cord,
or turn the switch ON until the missing or damaged
part is obtained and is installed correctly.
STAND
ITEM DESCRIPTION
M Stand assembly
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpiece.
English
QUANTITY
1