Sony MHC-GNX100 Manual De Instrucciones página 18

4
Turn . > clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) until
the track number you want appears in
the display.
The total playing time flashes in the display.
When programming an MP3 audio track,
turn and hold ALBUM +/– clockwise or
counterclockwise and release it at the album
you want (or press ALBUM +/– on the
remote repeatedly until the album you want
appears in the display), then turn .
clockwise or counterclockwise (or press
–. or >+ on the remote repeatedly)
until the track number you want appears in
the display.
Disc tray Track
number number
5
Press ENTER.
The track(s) is(are) programmed.
The program step number appears in the
display.
6
To program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on
other discs
7
Press nN (or N on the remote).
Program Play starts.
GB
18
Total playing time
(including selected
track)
Repeat steps
3 and 5
4 and 5
3 to 5
Other operations
To
Cancel Program
Play
Clear a track from
the end of program
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
>
nN
(or N on the remote) to play back the same
program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Do this
When playback is stopped, press
PLAY MODE on the remote
repeatedly until "PROGRAM"
disappear from the display.
Press CLEAR on the remote
when playback is stopped.