Changing The Spectrum Analyzer Display; Adjusting The Brightness Of The Display - Sony MHC-GNX100 Manual De Instrucciones

Changing the spectrum
analyzer display
1
Press AMP MENU repeatedly to select
"SPECTRUM".
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
T
SPECTRUM 1
Y
SPECTRUM OFF
R
t
SPECTRUM 4
3
Press ENTER.
When X-ROUND mode is selected
(MHC-GNX100 only)
1
Press AMP MENU repeatedly to select
"X-POSITION".
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
X-POS ON* y X-POS OFF
*The spectrum analyzer display will synchronize
with the selected X-ROUND effect.
3
Press ENTER.
t
SPECTRUM 2
Y
SPECTRUM 3
R
T
Adjusting the brightness
of the display
1
Press AMP MENU repeatedly to select
"DIMMER".
The last selected dimmer setting appears in
the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
t
DIMMER OFF
t
DIMMER 2*
* DIMMER 2 is the darkest.
3
Press ENTER.
y T
DIMMER 1
T
37 GB