How To Operate Your Remote Control - Fanimation The Torto FP7902 Serie Manual Del Propietário

Final Fan Assembly (continued)
3. Assemble the light plate to the support bracket
using the two key slots and replace the third screw
and securely tighten. (Figure 3)
4. Securely attach glass by twisting clockwise onto
the light plate assembly. Don't overtighten or
force it. (Figure 4)

How to Operate Your Remote Control

IMPORTANT:
1. Using a full range dimmer switch
(not included) to control fan speed will damage the fan.
To reduce the risk of fire or electrical shock, do not use
a full range dimmer switch to control the fan speed.
(Figure 1)
2. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 2)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
Do not operate this fan with a variable (Rheostat) wall
controller or dimmer switch. Doing so could result in
damage to the ceiling fan's remote control unit.
For illustrative purposes only-not
intended to cover all types of controls
11
Figure 3
Glass
Figure 4
Figure 1
MAIN FUSE BOX
Figure 2