Safety Instructions - HSM Primo 900 Instrucciones De Servicio

1
Proper use, warranty
Check the name plate on the back of the
machine to fi nd out the cutting width and
mains voltage for your document shredder
and observe the applicable instructions in
the operating manual.
The shredder is designed for destroying
paper. Depending on the cutting type, it can
also handle small quantities of the following
materials:
Shred width (mm)
Credit and charge cards
Its sturdy drive mechanism is not damaged
by paper clips and staples.
The warranty period for the document
shredder is 2 years. There is a special war-
ranty for the HSM solid steel cutting rollers
in the document shredder, which is pro-
vided independently of the guarantee, and
remains valid for the entire service life of
the machine (HSM Lifetime Warranty). This
warranty and guarantee exclude wear and
damage caused by improper handling or ac-
tions taken by third parties.

2 Safety instructions

Classifi cation
Safety notice
WARNING
Notice
06/2014
3.9 5.8
● ●
Explanation
Failure to observe
this warning can
lead to serious or
fatal injury.
Failure to observe
this instruction can
cause damage.
Classic 90.2 • Primo 900
english
Before using the machine for the
fi rst time, read the operating man-
ual, and keep it for later use and to
pass on to any subsequent users. Observe
all safety instructions on to the machine.
WARNING
Dangerous for children and
others!
The machine may not be used by
persons (including children under
14 years of age) with limited physi-
cal, sensory or mental capabilities
or with a lack of experience and
knowledge, unless they are supervised by
a responsible person or are instructed by
them on the use of the machine. Children
must be supervised to ensure they do not
play with the machine. Do not leave the
document shredder switched on when it is
unattended.
WARNING
Risk of injury!
Do not reach into the paper feed
slot.
Risk of injury from being pulled
in!
Keep long hair, loose articles of
clothing, ties, scarves, jewellery,
etc. away from feed opening. Ma-
terial with the tendency to form
loops, e.g. tapes, strapping mate-
rial, etc. must not be shredded.
Risk of combustion!
Do not use cleaning agents or
pressurized air sprays which con-
tain infl ammable substances, as
they could ignite.
9