Setup Sub-Menu; Mode Menu; Units Menu - OHAUS NVE Serie Manual De Instrucciones

NVE

4.3 Setup Sub-Menu

The backlit LCD display will have different menu items or settings based on the functionality.
 Auto Off [A-Off] (on, off) - When Auto Off is set to "on" the balance will turn off automatically
after 5 minutes of inactivity. Auto off is used to save battery power.
 Display [disply] (on, auto, off ) - This setting controls the LCD backlight; constant on,
automatic turn off after 5 seconds of balance inactivity, or always off.

4.4 Mode Menu

This sub-menu activates modes so they will be available for use with the Mode button. Weigh mode is
always active.
 Parts Count [Count] (on, off) - Set on for the mode to be active.
 Percent [Percnt] (on, off) - Set on for the mode to be active.
 Check Weigh [CHECk] (on, off) - Set on for the mode to be active.

4.5 Units Menu

This sub-menu activates units so they will be accessible with the Units button. The units in the menu
must be turned "on" to be active.
Note: Available units and modes vary by model and local regulations.
4.6 Sealing access to balance settings
You can use the Menu Lock switch to lock the settings of the user menu. The switch can be secured
using paper seals, wire seals or plastic ties. Once the switch is in the "locked" position, the user menu
cannot be accessed.
Locked
EN-7
Unlocked