Precautions For Use - Gossen MetraWatt WZ11 Instrucciones De Servicio

Pinzas amperimétricas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
Meaning of symbol
Attention ! Consulter le mode d'emploi avant d'utiliser
l'appareil. In this User's manual, failure to follow or carry out
instructions preceded by this symbol may result in personal
injury or damage to the device and the installations.
Meaning of symbol
This appliance is protected by dual insulation or reinforced
insulation. It does not have to be connected to an earth
protection terminal for electrical safety.
Meaning of CAT III symbol
This voltage surge category III clamp, with pollution level 2,
complies with stringent reliability and availability requirements,
corresponding to fixed industrial and domestic installations
(see IEC 664-1).
Thank you for purchasing this WZ11 series ammeter miniclamp.
To obtain the best possible service from your device :
read this User's manual carefully,
comply with the precautions for use.

PRECAUTIONS FOR USE

Do not measure currents greater than 240 A and limit measuring
times above 200 A (see 4.4.1 Overloads and 4.4.2 Frequencies).
Do not use the device on non-insulated conductors with a
potential of more than 600 V in relation to the earth and a
voltage surge category greater than III.
Comply with environmental conditions (see 4.4.3).
Keep the jaw gap perfectly clean (see 5.1 Cleaning).
WARRANTY
Our guarantee is applicable for twelve months after the date on which the
equipment is made available.
6
6

Publicidad

Tabla de contenido
loading

Tabla de contenido