Shoulder Strap - Husqvarna 130BT Manual De Instrucciones

Ocultar thumbs Ver también para 130BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Put the filter in a plastic bag and pour the filter oil over it.
Knead the plastic bag to distribute the oil. Squeeze the
excess oil out of the filter inside the plastic bag and pour
off the excess before fitting the filter to the machine. Never
use common engine oil. This would drain through the filter
quite quickly and collect in the bottom.

Shoulder strap

If the shoulder strap is damaged, it may break while in use
and the machine may fall causing personal injury. Follow
the instructions below to replace the shoulder strap.
1
Remove the clamp from the strap.
2
Run the end of the strap through the hanger.
3
Refit the clamp to the strap.
WARNING! Check that the thick round
!
pin in the clamp is inserted in the strap. If
it is inserted incorrectly it may lead to
personal injury.
MAINTENANCE
English
19

Publicidad

Tabla de contenido
loading

Tabla de contenido