Setup And Spare Parts List; Residual Risks - Kerbl HappyCow Swing Instrucciones De Uso

6. Setup and spare parts list

Item number Description
18871 Motor/transmission unit
18771 Replacement brush, 1 m reel
18773 Plastic casing, large, for printed circuit board
18775 Circuit board
18781 Plastic casing, small, for movement sensor
18777 Sensor
18778 Cable, length 2.50m
18784 Mounting bracket with bearing and circlip
18787 Shaft, 1 m, round
18788 Hanger
187016 Motor capacitor 16 µF 450 VAC, 50-60Hz
18874 Metal casing
18876 UCFL 205 bearing

7. Residual risks

Risks for persons:
under the following circumstances, the safety of persons and material objects can be endangered:
• if the safety devices on moving parts have been removed.
• if any damage to the control system is not repaired immediately.
• if untrained personnel are working on electronic parts.
• if the machine is activated before being secured properly to a wall or pillar (for testing or demonstration reasons).
The following points summarise further measures aimed at protecting against personal and material risks:
• ensure that the machine, the control devices and the brushes are not damaged during transport and installation.
• mount the machine in a place that is well ventilated and free from electromagnetic interference.
• the personnel responsible must be trained in the use and maintenance of the machine.
Risk for animals:
under the following circumstances, the safety of the cattle can be endangered:
• the animals are not yet fully mature.
• the cattle are of an unusually small breed.
– > the switch-off resistance can be set too high.
• the animals have collars and/or tail hairs that are too long.
• the animals' hides are more than 5 cm long.
• the customer has not protected the current-carrying parts (cables) adequately / at all against biting.
Important: the length of the cattle's tail hairs must not exceed 5 cm!
38
18770 18870 18880
X
X X
X X
X X
X X
X X
X X
X X
X X
X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X