Serato Dj Pro Dvs Control - Reloop Elite Manual De Instrucciones

FIRMWARE UPDATE
In order to carry out a firmware update, connect your ELITE via USB -51- to a computer and make sure that your ELITE is turned off via the ON/OFF
Switch -54-. Scroll to FW UPDATE and confirm this item by pressing the Time Encoder. Please regularly check www.reloop.com for ELITE firmware
updates. Please make sure that the loaded firmware is compatible with your device.
1. Download the corresponding update package from the Reloop ELITE product site and open it.
2. Open the program "ReloopFirmwareUpdate.jar".
3. Select the new firmware file by clicking "Open File" and selecting the included *.bin file.
4. Click "Start >". The update will start now.
5. After a successful update turn off the Reloop ELITE.
If you feel uncertain about this procedure, let your specialized dealer carry out the update.
ABOUT
Shows the current firmware version.
EXIT
The mixing console starts anew.

4. SERATO DJ PRO DVS CONTROL

ELITE is a Serato DJ Pro and DVS enabled mixer and does not require further licenses for activation. Make sure that the mixer is connected via
USB to your computer and that you run the latest Serato DJ Pro version (www.serato.com).
4.1 Functionality
Navigation Section
By turning the Navigation Encoder, it is possible to browse the respective active playlist view. By pressing the Load Buttons, the selected track
will be loaded to the right deck.
Provided that 2 Serato DJ Pro instances are connected to ELITE, the Navigation Section can be assigned to one instance at a time. Therefore,
only one computer can access the navigation section at a time, which prevents you from accidentally loading a track. By pressing Shift+Load1 the
assignment will be carried out for USB Port A and by pressing Shift+Load2 the assignment will be carried out for USB Port B. The assignment can
be carried out automatically or manually, as described,
Loop Section
By turning the Loop Encoder, you can adjust the loop's length. The currently active length is additionally shown in the Loop Length Bar. By pressing
the encoder, auto loop will be set, according to the set length. Via the Loop In/Out Button it is possible to set a manual loop. In case no active loop
is set, pressing once will result in setting a loop starting point. The button will start blinking. By pressing again, you will set the loop ending point.
The loop is now active and the button will be constantly lit. If a loop is already active, the loop starting point can be adjusted by pressing the Loop
In/Out Button. If you wish to adjust the loop ending point, press Shift+Loop In/Out.
Serato DJ Pro offers the possibility to manipulate the tone pitch of a track. By pressing and turning Shift+Loop Length Encoder, the tone pitch will
be adjusted. By pressing and holding Shift+Loop Encoder, the tone pitch will be matched, according to the respective opposite deck.
NOTE! For tone pitch manipulation the Serato Expansion Pack "Pitch 'N Time" is necessary.
Performance Mode Section
It is possible to set 12 different modes for the 8 touch-sensitive pads:
Hot Cue Mode:
Triggers the 8 available cue points per deck.
The hot cue colours can be adjusted to one's requirements in the software and the pads will shine correspondingly. Parameter knobs will carry out
Serato "Flip" functions: Play, Record, Loop, On/Off.
Loop Roll Mode:
Each pad (de-)activates a loop roll, when the pad is being held. A loop length between 1/32 – 4/1 is assigned to each deck.
Slicer Mode:
When slicer is active, a specified section will be split into 8 even parts. These 8 sliced parts will be spread across the corresponding performance
pads. When the playhead reaches the end of a section, it will move beyond the section and create a new one.
Sampler Mode:
Pads 1-6 trigger the 6 available sample slots. Shift+Pad stops the sample. Via the parameter buttons you can switch between banks A, B, C and D.
Adjust the volume via the Sample Volume Dial.
Pitch Play Mode:
In combination with Pitch 'N Time, it is possible to play back your cues in different tone keys. There are 3 tone keys at your disposal. In order to
switch between these, press the left or right PARAM 1 Button. The pad with the fundamental note is lit white; here the cue point will be played back
in its original tone key. When in Pitch Play Mode, your cue point will be played back in various tone keys by playing the pads. To select another hot
cue point, hold shift and simultaneously press another pad (hot cue).
Saved Loop Mode:
It is possible to store up to 8 loops. Each pad corresponds to a loop slot. To store a loop, set an auto loop and press a pad slot. By pressing again,
the loop will be deleted.
Trigger the loop by simultaneously pressing the shift button and a pad.
Slicer Loop Mode:
If slicer is active, a specific section will be divided into 8 even parts. These 8 sliced parts will be spread across the corresponding performance
pads. When the playhead reaches the ending of a section, it will move back to the beginning of the section and play back the loop again.
Saved Flips Mode:
Up to 8 saved flips can be displayed, which can be activated by pressing. Shift+Pad jumps directly to the respective flip and will start it as well.
19