Technical Specifications; Dimensions; Controls, Indicators And Connections; Inspection Prior To Starting - Nilfisk T30S Manual De Instrucciones

Technical specifications

Parameter Units
Voltage V
Power rating kW
Protection IP
Insulation Class
Protection (electrical) Class
Noise level dB(A)
Container capacity L
Inlet (diameter) mm
Max vacuum mbar
Maximum air flow rate
(without hose and L/min'
reductions)
Main filter surface m
2

Dimensions

Figure 3
Model
L 50 1250
A (mm) L 100 -
GU -
B (mm) 980
C (mm) 600
kg 100
(1)
(1) Net weight
[ NOTE ]
■ Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
01/2015
T30S (50 Hz) T30S (60 Hz)
400 220/380/440
3 3,6
55 55
F F
GB GB
70 73
50 / 100 50 / 100
70 70
310 380
5830 6830
1,95 1,95
T30S
- -
1530 -
- 1530
980 980
600 600
103 103

Controls, indicators and connections

1 Dust container release lever
2 Wheel brake
3
Manual filter shaker knob
4 Start/stop switch

Inspection prior to starting

1 Inlet
Prior to starting, check that:
■ The filter is installed.
■ All latches are tightly locked;
■ The vacuum hose and tools have been correctly fitted
into the inlet (1)
Do not use the vacuum cleaner if the filter is faulty.

Starting up

1
Castor brakes
2 Start/stop switch
Lock the castor brakes before starting the vacuum cleaner (1).

Starting/stopping the vacuum cleaner

Normal version
■ Press or turn the switch (2) to "I" position to start the
vacuum cleaner.
■ Press or turn the switch to "0" position to turn the vacuum
cleaner off.
Checking the rotation direction of the vacuum unit motor
Check the vacuum cleaner operation by putting a hand on the
inlet.
If the vacuum cleaner expels the air from the vacuum hose,
the rotation direction is not correct; remove the plug from the
socket and ask for assistance from qualified personnel to
perform the correct phase connection.
7
Figure 4
Figure 5
Figure 6
T30S
GB
C341