Safety Systems; Overview - Bosch MMB43 Serie Instrucciones De Uso

Safety systems

Start lock-out
The appliance cannot be switched on until
the blender jug has been turned firmly into
place.
Automatic disconnection
The appliance switches off automatically
if the blender jug accidentally becomes
detached during operation.
Overload protection
If the motor switches itself off while the appli-
ance is being used, the overload protection
feature has been activated. Possible causes:
– very large amounts of ingredients,
– appliance operated too long.
If a safety system is activated, see
"Troubleshooting".

Overview

These operating instructions refer to various
models. An overview of the different models
can be found on the illustrated pages
(Fig. F).
Please fold out the illustrated pages.
1 Motor block
2 Rotary switch with illuminated ring
The illuminated ring flashes slowly when
the appliance is ready for use (on).
The illuminated ring is lit continuously
when the appliance is in operation.
Rapid flashing signals a fault (see
"Troubleshooting").
a MMB43.. :
0/off = Stop
on = Appliance switched on
1 = Lowest operating speed
5 = Highest operating speed
b MMB64.. :
0/off = Stop
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
Q = pulse circuit at maximum speed,
hold down switch for required duration
c MMB65.. :
0/off = Stop
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
3 Quick-selection buttons
Preset buttons for optimum results.
For some models:
= f or crushing ice cubes (crushed
T
ice). Press button 1x briefly.
= F or making mixed drinks
U
and smoothies. Press button
1x briefly.
For an even more delicate
result, press the button a
second time.
= F or cutting ingredients in the
V
universal cutter. Press button
1x briefly.
Pay attention to Figure G in
the table!
Q = P ulse circuit at maximum speed.
Hold down button for required
duration.
When the quick-selection buttons
T/U/V have been pressed, the preset
programme runs. To end the programme
early, press any quick-selection button or
turn the rotary switch to 0/off.
4 Cord store
5 Drive
6 Blade holder with blender/cutting
blade and seal
For some models. is used for the blender
jug and the universal cutter jug.
7 Blender jug made of borosilicate glass
Especially heat-resistant, even very hot
ingredients can be processed.
8 Lid with feed tube
9 Measuring cup with scale (max. 50 ml)
10 Smoothie insert*
For the preparation of fruits and other
ingredients into juices and smoothies.
The insert ensures that pips and other
solid ingredients are filtered out and do
not get into the drinks.
11 Universal cutter jug*
* Not all models.
Safety systems
en
15