General Power Tool Safety Warnings - Makita DDF448 Manual De Instrucciones

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Switch trigger
6. Lamp
7. Reversing switch lever
8. Speed change lever
9. Action mode changing ring
10. Arrow
11. Adjusting ring
SPECIFICATIONS
Capacities
-1
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRIVER DRILL
SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
Explanation of general view
12. Graduation
13. LED indicator
14. Groove
15. Protrusion
16. Steel band
17. Grip base
18. Side grip
19. Sleeve
20. Bit holder
21. Bit
22. Hook
Model
Drilling into steel
Drilling into wood
Fastening wood screw
Fastening machine screw
High (2)
)
Low (1)
Overall length
Net weight
Rated voltage
8 mm x 75 mm
D.C. 14.4 V
3. Hold power tool by insulated gripping surfaces,
ENE034-1
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
GEA010-1
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
GEB088-1
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
23. Screw
24. Limit mark
25. Rear cover
26. Screws
27. Arm
28. Spring
29. Recessed part
30. Carbon brush cap
31. Hole
DDF448
13 mm
65 mm
6 mm
0 - 1,800
0 - 350
225 mm
2.2 kg
DDF458
13 mm
76 mm
10 mm x 90 mm
0 - 2,000
0 - 400
2.3 kg
D.C. 18 V
5