Product Overview - Toro 22in Recycler Manual Del Operador

through 5 until the oil level is at the Full mark on the
dipstick (Figure 4).
Important: Do not overfill the crankcase with
oil and run the engine. If you overfilled the
crankcase, drain the excess oil until the oil level
on the dipstick reads Full; refer to Changing the
Engine Oil.
6. Install the dipstick into the oil fill tube securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.

Product Overview

1. Blade control bar
2. Self-propel drive bar
3. Fuel tank cap
4. Oil fill/dipstick
5. Spark plug
6. Cutting height lever (4)
1. Grass bag
6
Figure 5
7. Air filter
8. Side-discharge deflector
9. Bag-on-demand lever
10. Handle knob (2)
11. Recoil start handle
Figure 6
2. Side discharge chute