Technical Data; Machine Features - Festool SHINEX RAP 150-14 FE Manual De Instrucciones

RAP 150 FE14/21
GB
3 Intended use
The machine is designed for polishing painted sur-
faces. To guarantee electrical safety, the machine
must not be damp or operated in a damp environ-
ment.
4

Technical data

S H I N E X rotary polisher
Power
110 V- version:
Speed
1
Max. speed
Polishing pads up to
Connecting thread of drive shaft
Weight (without mains cable/polishing pad)
Safety class
1.
Max. speed in the event of faulty electronics.
5

Machine features

Spindle stop
[1-1]
Speed control
[1-2]
[1-3] Locking button
[1-4] On/Off switch
Lint filter
[1-5]
Additional handle
[1-6]
[1-7] Polishing pads
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-

er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be
used.
The switch [1-4] is an on/off switch (press = ON, re-
lease = OFF).
The locking button [1-3] can be engaged to operate
in continuous mode. Press the switch again to re-
lease the knob.
14
The user bears the responsibility for damage and
accidents caused by improper use.
RAP 150-14 FE
1200 W
10 A
-1
600 - 1400 min
3000 min-1
dia.150 mm (5.9 in.)
M14
2.1 kg
/II
7 Settings
WARNING
Risk of injury, electric shock
Always pull the mains plug out of the socket be-

fore performing any type of work on the ma-
chine!
7.1 Electronics
The machine features full-wave phase control elec-
tronics with the following features:
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Speed control
The available speed when the ON/OFF switch [1-4]
is pressed down fully can be set [1-2] between 600
and 1400 rpm (RAP 150-14) or 900 and 2100 rpm
(RAP 150-21) using the adjusting wheel. This en-
ables you to optimise the cutting speed to suit the
surface (see table).
 The power tool is fitted with a variable speed
trigger: Pressing the ON/OFF switch harder in-
creases the speed.
Application
Working in polish
Polishing sensitive surfaces
High-gloss polishing
RAP 150 -21 FE
1200 W
10 A
-1
900 - 2100 min
3000 min-1
dia. 150 mm (5.9 in.)
M14
2.1 kg
/II
Adjusting wheel
setting
1 - 2
3 - 4
5 - 6