Recommended Spare Parts; Troubleshooting - Nilfisk Alto ATTIX 200 Instrucciones De Funcionamiento

Recommended spare parts

The following is a list of spare parts that should be kept ready at
hand in order to speed up maintenance operations.
List of recommended spare parts
Figure 24
Pos. Description
1 Star filter "L"
2 Star filter "M"
3 Filter ring
4 Filter ring gasket
5 Filter clamp
Upstream Hepa filter
6
"H"
Downstream HEPA
7
filter
8 Container/cover
11/2008
Code
Mod. Dimensions
number
Ø 560 8 17081
Ø 560 8 17246
Ø 560 8 15005
Ø 560 8 17027
Ø 560 8 18081
Ø 400 x 400 8 17264
475 x 610 x
8 17093
292
Ø 460 8 40275

Troubleshooting

Problem Cause
The vacuum cleaner Clogged primary filter
suddenly stops
Clogged vacuum
hose
Circuit breaker
activation
Dust leaks from the The filter is torn
vacuum cleaner
Inadequate filter
The vacuum cleaner Incorrect connection
blows instead of to the electrical mains
vacuuming
Electrostatic current Non existent or
on the vacuum inefficient grounding
cleaner
13
ATTIX 200
Remedy
Shake the filter.
Replace it if
necessary
Check the vacuum
hose and clean it
Check the setting.
Check the motor
electrical input.
Contact an authorized
Service Centre if
necessary.
Replace it with
another of identical
type
Replace it with
another of a suitable
category and check
Remove the plug
and invert two of the
phase wires
Check all ground
connections.
Especially check
the inlet. Lastly, the
hose must be strictly
antistatic.
I
GB
F
D
E
C329