Loading Envelopes - Canon imageRUNNER C356iF Guía De Preguntas Frecuentes

Loading Envelopes

CAUTION!
• Envelopes can only be loaded in the multi-purpose tray or the standard paper drawer.
• Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and pressure of
the fixing unit.
• Do not print on the reverse side of the envelopes (the side with the glued areas).
• For the paper drawer, load envelopes the front side face up, and for the multi-purpose tray, load them the front side
face down. For the loading orientation, see the table below.
Yougatanaga 3
Nagagata 3
Monarch
COM10 No.10
DL
ISO-C5
Preparation before Loading Envelopes
1
Take five or so pieces of envelopes, fan them well
to eliminate curls, and level the stack flat.
Paper Drawer
Envelope
Paper Drawer
Press the stack along
the four side edges.
Multi-Purpose Tray
Multi-Purpose Tray
2
To prevent the sealing edge of the seal flap from
floating from the body of the envelope, press the
envelope in the four corners and expel the air.
13