Operation Switches - Singer FUTURA SES2000 Importantes Instrucciones De Seguridad

OPERATION SWITCHES

NEEDLE STOP POSITION SELECTOR SWITCH (
Push the switch and LED lamp will be lit red and needle will
stop at down position whenever you stop sewing.
Push it again to stop needle at up position.
REVERSE STITCH BUTTON
* Reverse stitch function for
straight and zigzag stitches (
Reverse sewing is carried out while the reverse stitch button
is pushed.
The machine will continue to sew in reverse as long as the
reverse switch button is pressed.
* Tacking stitch function for tie-off of other stitches (
The sewing machine makes 4 tiny tacking stitches to tie
off the sewing on all patterns except straight and zigzag
stitches. The position of the tacking stitches will be at the
exact spot in the pattern where the reverse/tacking stitch
button is pushed.
START/STOP SWITCH
This switch works only when sewing embroidery.
LED INDICATOR
 Green light indicates machine is ready to start.
 Red light indicates machine is operating.
 Flashing red light indicates a problem or an error.
* Flashing for 2 - 3 seconds shows that an incorrect
operation was made.
* Continuous flashing indicates a machine malfunction.
104
)
Reverse stitch function
for straight and zigzag
)
stitches
Fonction couture
arrière pour les points
droits et zigzags
Función de costura
hacia atrás para
costuras rectas y
zigzag
Tacking stitch function
for tie-off of other
)
stitches
Fonction de point
de faufilage pour la
jonction avec d'autres
points
Función de remate
para terminación de
otras puntadas.
Needle stop position
selector switch
Touche de position
d'arrêt d'aiguille
Interruptor de posicion
de aguja parada
Reverse stitch button
Interrupteur couture arrière
Interruptor de puntadas
hacia atrás
LED indicator
Témoin a diode
Start/stop switch
Indicador LED
(For embroidery only)
Interrupteur marche/arrêt
(Pour la broderie seulement)
Pulsador de comienzo/parada
(Sólo para bordado)