Buttonhole Making - Singer FUTURA SES2000 Importantes Instrucciones De Seguridad

BUTTONHOLE MAKING

USING BUTTONHOLE FOOT
1. Insert a button in between tab A and tab B.
2. Buttonholes can be sewn to match the size of the button.
It is helpful to remove the extension table when sewing
a buttonhole, to avoid hearing the foot make noise when
moving across the table.
PROCEDURE
* Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer or regular interfacing can
be used.
* Make a practice buttonhole on a scrap of the fabric you are
using. Then try the buttonhole with the selected button.
1. Select one buttonhole pattern: 94, 95, 96, 97, 98 or 99.
2. Replace the presser foot with the buttonhole foot. (Refer to
"Changing presser foot" on page 102 - 103.)
3. Insert the button into the buttonhole foot. (Refer to "Using
buttonhole foot" above.)
4. Set the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
60
Tab B
Languette B
Tab A
Lengüeta B
Butée A
Lengüeta A
(C)
(A)
(C)
(C)
(B)
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
(C)