Flex FX3171A Manual Del Operador página 11

WARNING
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
WARNING
battery pack before making any adjustments
or changing accessories.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
Be careful not to turn on the tool when attaching
the battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
WHEEL GUARD INSTALLATION (FIG. 3)
A guard must be used when using the tool as a
grinder or cut-off tool.
WARNING
direct the guard opening toward your body.
a. Remove the battery pack from the tool.
b. Align the three raised ribs on the guard with
the three notches on the collar. Put the guard
onto the collar (1).
c. Turn the guard clockwise to the desired
position (2).
Rotation is possible in one direction only!
d. Remove in reverse order.
NOTICE: Use only grinding wheels of the
specified size with the grinding guard. Use
only cut-off wheels of the specified size with
the cutting guard.
GRINDING/CUT-OFF WHEEL ASSEMBLY
Detach the battery pack
from the tool before
To reduce the risk of
injury, always remove the
Keep the guard between
you and the wheel. Do not
ASSEMBLY
Fig. 2
battery pack can cause damage to internal
components.
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
Fig. 3
1
WARNING
-11-
Battery-release
Button
Ribs
Turn the tool OFF and
2