Flex FX3171A Manual Del Operador página 14

PRESELECTING THE SPEED (FIG. 9)
Your tool is equipped with a memory function.
After turning the tool off, the tool will revert to
the previous setting the next time it is turned on.
Use the + or - button to increase or decrease
the speed. Each press changes the speed
by one level. The table below shows the
relationship between rotational speed and the
number of LEDs that shine on the foot of the
too.
The Number of LEDs
ON OFF
ADJUSTING THE GUARD (FIG. 10)
To adjust the tool to the task at hand, the guard
can be positioned among 12 notches on 360°
without use of a tool.
WARNING
a. Remove the battery pack from the tool.
b. Turn the guard opposite to the direction-of-
rotation arrow on the gear head to reach the
required position.
ADJUSTMENTS
Speed (RPM)
3500
5000
7000
10000
Risk of injury! Wear
protective gloves.
Fig. 9
Speed-selection button (only for
variable speed angle grinder)
X
Fig. 10
-14-
click
click
click