Flex FX3171A Manual Del Operador página 15

WARNING
careful when the tool is not in use or when
carrying it at your side.
PADDLE SWITCH (FIG. 11)
To unlock the switch and turn the tool on
Push the lock-off switch-release lever forward
to unlock the paddle switch, then squeeze the
paddle switch.
To switch tool off
Release pressure on paddle lever. The switch is
spring loaded and will return to the "off" position
automatically.
WARNING
product damage due to a short circuit, never
immerse your tool, battery pack, or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
This cordless angle grinder must be used only with the battery packs and chargers listed
below:
2.5Ah 5Ah
FLEX FX0111 FLEX FX0121
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
OPERATION INSTRUCTIONS
Battery tools are always in
operating condition. Be
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
Battery Pack
8Ah
FLEX FX0221
Fig. 11
Paddle Switch
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
parts, making adjustments, or cleaning the
tool.
12Ah
FLEX FX0231
-15-
Lock-off-Switch-
Release Lever
Do not attempt to modify
this tool or create
To prevent accidental
starting that could cause
Charger
FLEX FX0411 FLEX FX0421