Operation; User Setup - Ikegami ISD-A20 Manual De Instrucciones

⑦ - ⑪ Camera setup function switches
Refer to the Operation chapter.
⑫ Video output terminal (VIDEO OUT)
Used to give out the video signal. Connect this to the video input terminal of a monitor,
switcher etc. (To be terminated with 75-ohm impedance.)
⑬ Power indicator (POWER)
The LED indicator stays on in green while the camera power is on.
⑭ DC12V/AC24V power input terminal
Keep the input power at DC10.5-15.0 V or AC24V±10%.
* This installation should be made by a qualified service person and should conform to
all local codes.

5. Operation

5-1. User setup

This camera can be user-preset for picture quality, synchronization, ID code and others.
The SETUP MENU is displayed in a tree view style, and the settings can be made using
onscreen characters.
3
1
Numbers of connector pins
E-5
4
2