STERWINS ELM2-40P-3W.4 Instrucciones De Montaje, Utilización Y Mantenimiento página 240

5. OPERATION
Disconnect power supply.
To raise the blade height, use your hand to adjust the blade height adjustment handle
in the meanwhile,you have to adjust the blade height adjustment knob
blade height level at the same position.
Connect to power supply when you are ready to mow.
Installing/Removing extension cord
Insert the female end of the extension cord into the product.
Connect the male end of the extension cord to the power source.
Make sure the extension cord is secured before beginning operation.
Starting/Stopping the mower
Connect to power supply.
Press and hold the switch button
switch button to start the mower.
2
To stop the mower,release the switch bar
making any adjustments to the mower.
Attention during operation
Firmly hold the handle with both hands when mowing.
Start mowing near the power socket to ensure that the extension cord does not become an
obstacle.
Do not allow the extension cord to pass under or become entangled beneath the machine.
Do not try to cut long grass all at once. Instead, mow the lawn in steps. Leave a day or two
between mowings until the lawn becomes evenly short.
When mowing at the edge, be sure to face the left side of the machine toward the edge, and
then move the machine along the edge.
WARNING: The mower can only be used outdoors, and in no case in a building.
The mower must be left outdoors for at least two hours before entering inside a
building.
.Pull the switch bar
2 1
.Let the blade come to a complete stop before
1
239
to make sure both
14
toward the handle and release the
FR
ES
PT
,and
11
IT
EL
PL
RU
KZ
UA
RO
EN