Maintenance Instructions - Fiamma F45S Serie Instrucciones De Montaje

MAINTENANCE INSTRUCTIONS

EN
All our awnings 'Made in Italy' and manufactured following high standards.
The awnings are made with precision, but some of the characteristics of the materials
little imperfections on paint or linearity of aluminium profiles; little marks or light
deformations of plastic parts)
materials and from the specific work processes, and these characteristics occur even
though Fiamma uses advanced and innovative machines production techniques. Apart
from our strict quality controls, we also have our fabrics continuously controlled by
inependent institutes to ensure that the fabric is tear resistant, they can hold the weight of
water, the colours don't fade and it is resistent against atmospheric agents. In order to
enjoy your awning for a long time, even for many years after the purchase date, we ask you
to take note of and follow the simple advices below:
MAINTENANCE INSTRUCTIONS
Make sure that your awning is completely dry and clean before closing it. The remaining
humidity could cause stains. If however you have no choice but closing the awning when it
is still wet, make sure to open it for drying within 12 hours maximum.Most of the dirt is
superficial and can be removed with clean water and a cloth or a brush. If the fabric is very
dirty, add some light cleaning detergent. Be aware never to use any aggressive chemical
substances and never to clean the fabric with a high pressure machine. We recommend
not to use the awning at a temperature below 0°C.
•
To guarantee a perfect quality, the fabrics are waxed or laminated several times. During
this operation, single coloured pigments could move and thus create small bright spots in
the material, which are only irregularities that are technically inevitable to avoid, but do not
influence the impermeability of the fabric.
in these spots.
•
During the production of the material, small creases could form, which especially on
bright fabric in backlight could seem dark. Bright stripes (the so called white crease) are
inevitable with these materials.
•
With time the influence of weather could cause change in colour.
•
All Fiamma fabrics are soldered on the front bar for a high resistance to water : in case of
rain little drops of water may form near the front bar and this may happen when the awning
is open as well, this doesn't compromise awning's functionality.
®
30
®
, which could be interpreted as defects, derive from the
OF FABRIC.
The fabric is therefore completely hermetic, also
(as