Stihl FS 110 Manual De Instrucciones página 20

English
Approved Combinations
The complete combination includes:
Cutting attachment
–
Deflector
–
Handle
–
Harness
–
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted because of
the risk of accidents.
Cutting attachments
Mowing heads
1 STIHL SuperCut 20-2
2 STIHL AutoCut C 25-2
3 STIHL AutoCut 25-2
4 STIHL TrimCut 31-2
5 STIHL FixCut 25-2
6 STIHL DuroCut 20-2
7 STIHL PolyCut 20-3
Metal cutting attachments
8 Grass cutting blade 230-4
(Ø 230 mm)
9 Grass cutting blade 230-8
(Ø 230 mm)
18
10 Brush knife 250-3
(Ø 250 mm)
11 Scratcher tooth circular saw blade
200
(Ø 200 mm)
12 Chisel tooth circular saw blade 200
(Ø 200 mm)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
13 Deflector for mowing heads
14 Deflector with
15 skirt and blade for mowing heads
16 Deflector without deflector with skirt
and blade for metal cutting
attachments 8 to 10
17 Limit stop for circular saw blades
Handles
18 Loop handle
19 Loop handle with
20 barrier bar
21 Bicycle handle
Harnesses
22 Shoulder strap may be used
23 Shoulder strap must be used
24 Full harness may be used
25 Full harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Use grass cutting metal blades and
brush knives on this unit only if equipped
with a bike handle or a loop handle with
barrier bar.
Use circular saw blades on this unit only
if equipped with a bike handle.
Do not use rigid plastic blades on this
unit.
FS 110, FS 110 R