Transporting The Unit - Stihl FS 110 Manual De Instrucciones

Crank the engine several times with
N
the starter – to clear the combustion
chamber
Replace the spark plug – see "Spark
N
plug"
Set the slide control to START
N
Turn the choke knob to e – even if
N
the engine is cold!
Restart the engine
N
Adjusting the throttle cable
Check throttle cable adjustment –
N
see "Adjusting the throttle cable"
If the tank has been drained completely
After refueling, press the manual
N
fuel pump bulb at least five times –
even if it is full of fuel.
Set choke lever depending on
N
engine temperature
Restart the engine
N
FS 110, FS 110 R

Transporting the Unit

Using a transport guard
The type of transport guard used
depends on the type of metal cutting
attachment supplied with the machine.
Transport guards are also available as
special accessories.
Fitting the transport guard for grass
cutting blades 230 and brush knives
The transport guard can be used for
grass cutting blades up to 230 mm
(9.1 in.) in diameter and for brush knife
250-3.
If a grass cutting blade 230 is fitted:
If a brush knife is fitted:
English
33