Publicidad
Idiomas disponibles
Idiomas disponibles
Regulator
A regulator is supplied with this Griddle. If a replacement is necessary, please visit chargriller.com
or call our customer service department, 912-638-4724. Do NOT use replacement parts that are not
intended for this grill. The life expectancy of the regulator is estimated as 10 years. It is recommended
that the regulator is changed within 10 years of the date of manufacture.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before
operating the appliance.
Connecting the Regulator to the Griddle
Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator,
burner, and burner ports. Spiders and insects can nest within and clog the burner/venturi tube at the
orifice. A clogged burner can lead to a fire beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner.
The Griddle must be used in a well-ventilated area. Do not obstruct the flow of combustion air to the
burner when in use. ONLY USE THIS APPLIANCE OUTDOORS.
Hand-tighten the sliding collar to the grill in a clockwise direction. Do not use tools!
Connecting the LP Gas Bottle to the
Griddle Regulator
This appliance is only suitable for use with low-pressure Propane bottles
1. Ensure all control knobs are in the OFF position and verify that the gas cylinder valve is closed by
turning the handle on the gas cylinder valve clockwise until it stops.
2. Remove the protective cap from the gas cylinder valve nozzle.
3. Hold the regulator in a straight line with the gas
cylinder valve nozzle so the connection does not
cross thread.
4. Insert regulator nipple into the gas cylinder valve
nozzle opening.
5. Perform a Leak Test. (See Leak Testing section of
this manual).
The LP Bottle / Regulator should look like the picture
below when properly connected.
C-2
GAS OPERATION
Publicidad
