Cleaning Coffee System" Programme; Descaling" Programme - melitta BARISTA TS SMART Manual De Instrucciones

Ocultar thumbs Ver también para BARISTA TS SMART:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

41
40
43
Fig. 24: Removing the milk unit, 2
1. Pull the milk hose off the appliance.
2. Push the outlet (7) down as far as it will
go.
3. Press the locking mechanism (43) of
the milk unit (40) together using two
fingers and pull the milk unit down-
wards off the outlet.
4. Pull the milk distributor (41) upwards
out of the milk unit.
5. Pull the inlet (42) out upwards.
6. Clean the individual parts with warm
water. Use the enclosed cleaning brush,
a soft, damp cloth and normal wash-
ing-up liquid.
Installation is carried out as described in
reverse order.
Information
To install, push the milk unit (40) onto the
outlet (7) using both hands. Make sure
that the locking mechanism (43) audibly
engages on both sides.
9.6 "Cleaning coffee system"
programme
This cleaning programme is used to
remove residues and coffee oil residues
with the aid of coffee machine cleaning
agents.
To avoid damage to the appliance, we
recommend carrying out the cleaning pro-
gramme every 2 months or as requested
by the appliance.
Before starting the cleaning programme,
42
clean the brewing unit and the interior
(see section 9.3, page 57).
The cleaning programme takes approx-
imately 15 minutes and should not be
interrupted.
43
Contact with coffee machine cleaning
agent may lead to eye and skin irritation.
ƒ
The use of unsuitable coffee machine
cleaning agents can damage the appli-
ance.
ƒ
Requirement: The appliance is ready for
operation.
1. Press the "menu/ok" button for 2 sec-
2. Navigate to the Care > Cleaning coffee
3. Use the arrow buttons to select Start
4. Follow the further instructions on the
»

9.7 "Descaling" programme

The descaling programme is used to
remove limescale deposits in the interior
of the appliance with coffee machine
descaling agents.
To avoid damage to the appliance, we rec-
ommend carrying out the descaling pro-
gramme every 3 months or as requested
by the appliance.
Care and maintenance
CAUTION
Observe the processing instructions on
the packaging of the coffee machine
cleaning agent.
ATTENTION
Only use Melitta® PERFECT CLEAN
cleaning tabs for fully automatic coffee
makers.
onds.
»
The menu appears on the display.
system menu.
and confirm with "menu/ok".
display up to the end of the cleaning
programme.
The appliance is ready for operation.
59

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Barista t smart

Tabla de contenido