Operation Instructions - Haier HMC735SESS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION INSTRUCTIONS

SETTING THE CLOCK
1. When the microwave is plugged into
an outlet, 0:00 will be displayed.
2. Press the 0 (Clock) pad, the hour digit
will flash.
3. Using the number pads enter the 4
digit correct time
a. example 5:23 in entered as 0,5,2,3
b. example 12:15 is entered as
1,2,1,5
4. Press the START/+30 Sec pad to
finish.
NOTE: If you want to reset the clock,
follow sets 2 through 4 above.
SETTING THE TIMER
The timer operates as a minute timer.
1. Press 9 (Timer) pad.
2. Enter the amount of time you want to
count down.
3. Press the START/+30 Sec pad. When
the time is completed, the timer will
signal 5 times.
NOTE: The timer operates without
microwave energy.
SETTING THE POWER LEVEL
The default power output setting is
100%. If you want to set a new power
level touch the POWER LEVEL pad,
repeatedly touch POWER LEVEL to
scroll through the different cooking
power levels.
NUMBER
COOKING
PAD
POWER
PL10
100%
PL9
90%
PL8
80%
PL7
70%
PL6
60%
NUMBER
COOKING
PAD
POWER
PL5
50%
PL4
40%
PL3
30%
PL2
20%
PL1
10%
PAGE 12 • SET UP & USE
EXPRESS COOK
One touch cooking at 100% power is
available by using the Express Cook
feature. When the microwave is idle,
select a cooking time by selecting
the 1 through 6 number pad or the
START/+30 Sec pad. You can add time,
in 30 second increments, by touching
the Start/+30 Sec pad for a maximum
time of 99 minutes and 99 seconds.
NOTE: Each time you touch the
START/+30 Sec pad, 30 seconds will be
added to the time, but will not work with
Weight DEFROST
SETTING A COOKING PROGRAM
1. Touch the Power Level pad and adjust
if desired, the default setting is 100%
power.
2. Use the number pad to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
3. Touch START/+30Sec to start
cooking.
Microwave Signals
When the microwave has completed
its operation, you will hear 5 beeps to
indicate the end of the cycle.
AUTO DEFROST
1. Touch the DEFROST AUTO/TIME pad,
the display will show dEF1.
2. Enter weight to be defrosted in
ounces (oz.) with the number pad,
from 4 to 100 oz.
3. Touch START/+30 Sec to begin
defrosting.
• During defrosting, you need to turn
food over for uniform defrosting. After
turning, touch START/+30 Sec pad to
resume defrosting.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido