Shindaiwa AHS2510/EVC Manual Del Propietario - Operador página 8

Assembly (continued)
Adjusting cutter assembly for storage or transportation
1. With the engine off, install the scab-
bard onto the blade.
2. Release the latch lock and the latch
release. Make sure the cutter blades,
latch lock, and the latch release return
securely to the straight ahead position.
3. Make sure the scabbard is in place on
the blade before storing or transporting.
Throttle lever free play
The throttle lever free play should be
approximately 4 - 6 mm. Make sure that
the throttle lever operates smoothly with-
out binding. If it becomes necessary to
adjust the lever free play, follow the pro-
cedures and illustrations that follow.
1. Loosen the air cleaner cover knob(s)
and remove the air cleaner cover.
2. Loosen the lock nut on the cable
adjuster. Turn the cable adjuster in or
out as required to obtain proper free
play 4 - 6 mm.
3. Tighten the locknut.
4. Reinstall the air cleaner cover.
8
WARNING!
Never run the engine when
adjusting the cutter assembly to the
storage position.
Cable
Adjuster
Lock Nut
Transport / storage position
4 - 6 mm