Specific Safety Rules; Functional Description - Milwaukee 5345-21 Manual Del Operador

1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear protectors. Exposure to noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
5. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE Service facility for a
free replacement.
6. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
Load/ Load/
Volts No No Load
Cat. AC Load Blows per
No. Only RPM Minute
5345-21 120
150-400* 1300-3450*
5346-21 120
150-400* 1300-3450*
5346-28 120 150-400* 1300-3450*
* EFCC - The Electronic Feedback Control Circuit maintains constant speed under
varying load conditions.
1. Rear side handle mount
2. Vibration Isolation System
3. Speed control dial
4. Handle
5. Trigger
6. Nameplate
7. Stop rotation knob
8. Bit lock (Cat. No. 5345-21)
Bit release collar (Cat. No. 5346-21, 5346-28)
9. Dust shield
10. Vibration isolation side handle
11. Depth gauge adjustment knob
12 Depth gauge

SPECIFIC SAFETY RULES

Specifications
Percussion
Carbide
Percussion
Tipped Core
Bits Bits
1-3/4"
6"
1-3/4"
6"
1-3/4"
6"

FUNCTIONAL DESCRIPTION

10
9
9
Self-
Drilling
Anchors Chisels
5/8"
See
"Chiseling and
5/8"
Chipping"
5/8"
11
12
8
7
6
8
Cat. No. 5346-21 and 5346-28
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
Alternating Current
Amps
No Load Revolutions per
Minute (RPM)
Mexican Approvals Marking
BPM
No Load Blows per Minute (BPM)
1
2
Cat. No. 5345-21
3
4
5
page 3