Windsor Recover 7 Manual Del Usuario página 7

Operations
Turning on the Machine
Plug in the main plug.
Turn the machine on and put it into op-
eration.
Emptying the dirt container
The vacuum canal (6) is equipped with a
float.
– When the dirt water reaches the highest
permissible level in the container, the
vacuum power is interrupted.
Turn off the machine.
Empty the dirt container.
Shutting down
Empty the dirt container.
Vacuum and wipe the machine inside
and outside.
Place the machine in a dry room and
secure it from unauthorized use.
Maintenance and care
Warning
First remove the main plug before doing
any job on the vacuum cleaner.
Change cartridge filter
Release and remove the vacuum head.
Turn the vacuum basket by 180° and
keep it aside.
Loosen nut (3).
Remove the cartridge filter (1).
Insert the new cartridge filter (1).
Insert the nut (3) and tighten it.
Insert and lock the vacuum head.
Troubleshooting
Vacuum motor does not run
Check cables, plugs, fuse, and socket.
Turn on the machine.
Vaccum motor is running but the
machine is not vacuuming in dust/
– Float is blocking the vacuum canal.
dirt
English
7