Maintenance And Inspections - Canon imageRUNNER 2202 Guía Breve

- If the laser beam escapes from the machine,
exposure may cause serious damage to your eyes.
- Controlling, adjusting, or operating the machine
in ways not mentioned in the manuals for this
machine may cause dangerous radiation to
escape from the machine.
IMPORTANT
Press [ ] (Energy Saver) for safety when the machine
will not be used for a long period of time, such as
overnight. Also, turn OFF the main power switch,
and disconnect the power cord for safety when the
machine will not be used for an extended period of
time, such as during consecutive holidays.

Maintenance and Inspections

WARNING
• When cleaning the machine, first turn OFF the main
power switch, then disconnect the power cord.
Failure to observe these steps may result in a fire or
electrical shock.
• Disconnect the power cord from the power outlet
regularly, and clean the area around the base of
the power plug's metal pins and the power outlet
with a dry cloth to ensure that all dust and grime is
removed. If the power cord is connected for a long
period of time in a damp, dusty, or smoky location,
dust can build up around the power plug and
become damp. This may cause a short circuit and
result in a fire.
• Clean the machine using a slightly dampened cloth
with a mild detergent mixed with water. Do not use
alcohol, benzene, paint thinner, or other flammable
substances. Check detergent for flammability prior
to use. If flammable substances come into contact
with a high-voltage area inside the machine, it may
result in a fire or electrical shock.
• There are some areas inside the machine which
are subject to high-voltages. When removing
jammed paper or when inspecting the inside of the
machine, do not allow necklaces, bracelets, or other
metal objects to touch the inside of the machine, as
this may result in burns or electrical shock.
• Do not burn or throw used toner cartridges into
open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or
a fire.
• Make sure that the power plug is firmly inserted
into the power outlet after cleaning the machine.
Do not use the machine while the connection is
loose, as doing so may cause a fire.
• Check the power cord and power plug regularly. If
the following conditions occur, contact your local
authorized Canon dealer, as the condition may
cause a fire:
- There are burn marks on the power plug.
- The blade on the power plug is deformed or
broken.
- The power goes OFF and ON when the power
cord is bent.
- There are cuts, cracks, or indentations on the
power cord.
- A part of the power cord becomes hot.
• Check the power cord and power plug regularly
to make sure that they are not handled in the
following manner, as this may result in a fire or
electrical shock:
- The connection part of the power plug is loose.
- Stress is being applied to the power cord by a
heavy object or by affixing it with staples.
- The power plug is loose.
- The power cord is tied in a bundle.
- The power cord protrudes into a walkway.
- The power cord is in front of a heater.
CAUTION
• The fixing unit and its surroundings inside the
machine may become hot during use. When
removing jammed paper or when inspecting the
inside of the machine, do not touch the fixing unit
and its surroundings, as doing so may result in
burns or electrical shock.
Important Safety Instructions
49