C.A 1623 RTD probe temperature calibrator
For maintenance, use only the specified spare parts. The manufacturer
cannot be held liable for an accident that occurs following a repair not done by its
customer service department or an approved repairer.
7.1
CLEANING
•
Disconnect all connections to the calibrator.
•
Clean the housing regularly with a wet cloth and detergent.
•
Do not use abrasive products or solvents.
7.2
CALIBRATION
•
Calibrate your calibrator once a year to make sure that it operates in conformity
with the specifications.
7.3
REPLACING THE BATTERIES
•
Replace the batteries when the LCD screen indicates
•
To replace the batteries, switch the calibrator off, withdraw the screw holding
the cover on the battery compartment, and replace the batteries with new 1.5 V
AAA batteries.
7.4
METROLOGICAL CHECK
Like all measuring and testing devices, the calibrator must be
checked periodically.
This instrument should be checked at least once a year. For checks and
calibrations, contact one of our accredited metrology laboratories (information and
contact details available on request), at our Chauvin-Arnoux subsidiary or the
branch in your country.
7.5
REPAIR
For all repairs before or after expiry of warranty, please return the device to your
distributor.
7 MAINTENANCE
20
English