Omnitronic DSS-2 Manual Del Usuario página 23

1. DISPLAY
LCD-display for displaying the different modes and functions. Please refer to the explanations under 6.3
LCD-display.
2. TRACK-BUTTONS
Via the Track-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting
a track via the Track-buttons.
3. SEARCH-BUTTONS
Pause-mode:
To cue and reverse at a very low speed. You can exactly select the starting-point. The selected frame is
repeated if you have pressed the Cue-button before (CUE-LED is shining).
Playback-mode:
Use the Search/Scan-buttons in order to cue and reverse at a very high speed.
4. LOOP IN-BUTTON
By pressing the In-button, you can memorize the Cue-point. Furthermore, you can program the In-button of a
sequence which will be repeated then.
Please refer to the explanations under 6.8 Memorizing a sequence (Loop-function).
5. LOOP OUT-BUTTON
By pressing the Out-button, you can memorize the Loop Out-button. The player will repeat the memorized
sequence until you press the Out-button once more.
6. RELOOP-BUTTON
Via the RELOOP-button, you can call up a memorized sequence once more.
7. AUTO CUE SINGLE -BUTTON
For choosing single playback or continous play. The indication "SINGLE" means that the CD-player is in
Single-mode. The current track is then played once and the player goes into Pause-mode at the beginning of
the next track. By pressing the Single-button, the CD-player changes into normal playback mode and the
display shows "CONTINUE".
8. PROGR.-BUTTON
For programming the desired tracks.
9. TIME/STOP BUTTON
For stopping the playback press the Stop-button for 3 seconds.
By using the Time-button, the time-indication can be switched from track remain time (Remain) to track
playback time (Elapsed), or total remain time (Total Remain).
10. PITCH CONTROL-BUTTON
With this button, you can switch the speed-adjustment via the pitchfader off (LED off).
11. PITCH SELECT-BUTTON
You can select the speed-adjusting range between ±8 %or ±16 % by pressing the Pitch Select-button and
selecting the desired range.
12. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by ±16 %. Furthermore, you
can synchronize the bass-beat of two different signal-sources with these buttons. Please refer to 6.6
Synchronisation of the playback-speed.
13. RELAY-BUTTON
By pressing the Relay-button, the playback automatically switches to the other player. Please refer to 6.10
Relay-operation.
14. PITCHFADER
You can adjust the desired speed with the Pitchfader. The display shows the current percentage or the
current beats per minute (BPM).
15. SCRATCH-WHEEL
Playback-mode:
23/64 10553155_V_1_0.DOC